Coefficient of heat transfer resistance
up to 0,83 m2 °С/W
Advantage over a regular window
up to 40%
The Fenster 400 profiles have simple and laconic shapes that will appeal to those who appreciate classic and restrained design.
Fenster 400 windows meet the requirements of DSTU and the European EN standard. The four-chamber profile with an installation depth of 60 mm prevents heat loss and is therefore energy efficient. Fenster 400 is equipped with 24 mm and 32 mm glass units
In combination with square reinforcement and Vorne anti-burglary fittings, Fenster 400 windows will protect against thieves.
Thermal insulation
up to 0,83 m2 °C/W
Noise insulation
up to 32 dB
Installation depth
60 mm
Number of chambers
4
Installation of glass units
24, 32 mm
Color of the seal
black
Maximum construction area
6,2 m2
Protection against burglary
RC1 and RC2
The possibility of manufacturing doors
external and internal opening
Possibility of manufacturing non-standard shapes
obliques, arches, trapezoids
Options for standard decorative coating film
golden oak (interior or exterior), sand anthracite (interior or exterior)





















































Construction of two sheets of glass with energy saving function
Possesses a high level of energy efficiency and noise insulation
Allows you to save on heating in winter and air conditioning in summer
Protection against cold in winter and excessive heat in summer
Prevents heat loss in cold weather, provides a comfortable temperature in the house
Comfortable temperature in the house in summer heat and severe winter frosts
Solar glass protects against excessive heat in summer and cold in winter
Energy-saving glass prevents heat loss in the cold season
Maximum burglary protection with additional energy savings
Protects from excessive sunlight and mechanical damage
Viknar’off doors are distinguished by their durability, innovation and the ability to implement non-standard architectural solutions.
The company uses modern equipment, such as Federhenn, Rapid, Graule and Urban, which allows it to produce bent imposts, trapezoids, oblique door leaves and other non-standard shapes with high precision.
To ensure maximum door strength, holes in the metal for the lock are made with a special plasma cutter. Viknar’off also uses the technology of reinforcing the seams with special welded connectors (corner reinforcements), which significantly increases the strength of the product. This method allows the reinforcement to be connected into a single continuous contour, increasing the overall stability and rigidity of the structure.
Interested in our products?