The simplest type of installation. A window mounted with this technology physically performs its functions, but there is a risk of reduced energy efficiency
Window Installation
Viknar’off
Warm installation
provides additional
protection of mounting foam
and increases tightness
seam in general
High-quality uPVC construction does not provide a 100% guarantee of energy efficiency. Warm installation provides special procedures at a stage of sealing of an assembly seam: in addition to traditional foaming insulating materials are used
APPROACH
TO INSTALLATION
TO INSTALLATION
PROFESSIONAL INSTALLATION - GUARANTEE OF DURABILITY, ENERGY EFFICIENCY AND COMFORT OPERATION
PREPARATION
The OPENING
The OPENING
Before installation, the old structure is dismantled, the wall is leveled and strengthened for maximum efficiency of future warm installation
CONSTRUCTION
INSTALLATION
INSTALLATION
Installation in an aperture occurs with alignment horizontally, vertically, and also in the plane by means of basic and remote blocks by means of a construction level
ASSEMBLY
MATERIALS
MATERIALS
The design is fixed by means of fastening elements. Mounting films and foam create sealing, waterproofing and vapor barrier, filling the mounting seam
FINAL
WORKS
WORKS
To ensure the best result for the consumer, the final treatment of the slopes inside and outside the room, which preserves the insulating properties of the structure
TYPES OF INSTALLATION
OF uPVC Constructions
OF uPVC Constructions
-
-
VIKNAR’OFF glazing unitsIn addition to standard features, they hcave other functional solutionsRead more
-
Sill profileIt is intended for fixing of a window sill and serves as a window support
-
SUPPORTING planksAllow to level a window in an aperture
-
INSTALLATION RISKSFoam under the influence of atmospheric phenomena for some time is destroyed and absorbs moisture, which leads to freezing of the mounting seam and mold
-
FASTENERSThe window is mounted on fixing clips or an anchor
-
WINDOW sillUndoubtedly, an integral and important part of any windowRead more
-
MOUNTING FOAMThe space between the window and the wall is filled with classic or elastic foam
Basic installation -
MATERIALS FOR WARM INSTALLATION
The complex of window tapes for warm installation provides protection of an assembly seam against destruction according to the standards. These materials for windows and doors guarantee energy saving, durability and tightness with a guarantee of up to 10 years
STEAM-INSULATING TAPE ALENOR® INTERNAL (MFPA)
APPLICATION
The tape is intended for internal vapor barrier of assembly seams of knots of connection of translucent designs to a surface of a wall opening. Protecting the mounting seam from the penetration of steam and moisture, it prevents the appearance of fungus and mold, the destruction of the plaster. Adhesive strips have very good adhesion to standard building materials. The tape can be painted or plastered after installation. The tape was successfully tested at the Leipzig Institute for Materials Research and Testing MFPA Leipzig GmbH (Germany)
Dimensions
75 × 2500, 100 × 2500, 150 × 2500 mm
STEAM-INSULATING TAPE ALENOR OV TM
APPLICATION
Internal vapor barrier window tape based on a protective foil coating, synthetic non-woven material of the membrane type and two adhesive strips. The tape is intended for internal vapor barrier of assembly seams. The tape has two adhesive strips on both sides. One strip is intended for fastening of a tape to a translucent design, another - for fastening of a tape to a wall slope. On the side of the strip intended for attachment to the translucent structure, the tape is duplicated with a nonwoven material to create adhesion of the tape with the plaster solution
Dimensions
75 × 2500, 100 × 2500, 150 × 2500 mm
STEAM-THROUGHPUT TAPE ALENOR ON-T - UV
APPLICATION
The external waterproofing vapor-permeable tape is intended for waterproofing of perimeter of an assembly seam of a translucent design, and any other construction seams and joints. The tape has two adhesive strips on one part. One strip is intended for fastening of a tape to a translucent design, another - for fastening of a tape to a wall or a slope. The use of ALENOR® waterproofing tapes provides reliable protection of the mounting foam from moisture outside the room and helps to remove moisture from the foam outside
Dimensions
75 × 2500, 100 × 2500, 150 × 2500 mm
PURS
SELF-EXPANDING TAPE
SELF-EXPANDING TAPE
APPLICATION
Polyurethane foam tape impregnated with a special solution that gives the tape elasticity and self-expansion properties. For ease of installation, the tape has a self-adhesive layer. PURS is used to seal seams and gaps in various structures. The properties of the PURS allow on the one hand to protect the seams and cracks from atmospheric phenomena, and on the other - to allow moisture to the outside, formed in the middle of the seam, cracks. When choosing a PURS tape, keep in mind that it should not expand completely, but only by the required percentage
Dimensions
HB-300:
20 × 4 mm, 30 × 4 mm (18 m)
20 × 6 mm, 30 × 6 mm (12 m)
HB-600:
20 × 4 mm, 30 × 4 mm (7.5 m)
20 × 6 mm, 30 × 6 mm (5 m)
